Easier than ever to measure flatness and straightness
One of the most important things during a machine installation is to ensure the flatness of the base. With the new XT20 and XT22 we have facilitated handling, which makes for faster measurements and fewer fault sources. More reliable machine installation, put simply.
Both transmitters can be used for flatness and straightness measurement. In addition, the XT22 can direct the laser beam at 90 degrees to the laser plane, which means you can solve virtually all types of geometric measurement jobs. The area of use therefore does not stop at measuring the flatness of bases. The XT22 also has a higher technical specification for straightness thanks to fiber laser technology, and can take measurements at distances up to 40 m. The XT20 can take measurements at distances up to 20 m, but is also IP55 rated water and dust proof.
New technology improves reliability
We have installed electronic precision levels in the XT transmitters. This gives the advantage of faster feedback when levelling and less risk of errors during calibration, because all users see the same angular value (compared with reading spirit levels).
The laser transmitters are wirelessly connected to the XT Alignment app. In this way, the user can be guided during calibration and the measurement procedure. In the event of temperature changes, vibrations or impacts that can affect the measurement result negatively, the app gives a warning during measurement. Data about the transmitter and measurement environment can be downloaded together with the report. This all provides greater reliability and traceability for your measurement jobs.
Functions for easier use
The rotating head is completely stable and retains its position during measurement. At the same time, with the new fine turning mechanism it is easy to set the pointing direction of the laser beam to hit the detector, even at distances up to 40 m. We guarantee that this will be very much appreciated by users out in the field. All operation is also managed without the need to lock/unlock rotation, which facilitates use considerably.
Just like Easy-Laser’s previous laser transmitter, the new XT20/XT22 can be installed and positioned in many different ways: with integrated super magnets, on rods to be height adjustable, on stands and magnetic feet etc. We know that this is an important factor in practice to combat all those situations the user faces in reality.
A rechargeable Li-Ion battery gives long operating times, up to 30 hours. If necessary, the transmitter can also be run directly off the mains.